iCopy X10 §

Link Marketplace §

Spesifikasi §

Cara penggunaan §

1. Smart key matching §

The first step of matching the card is to read the card through the smart key matching function, and then operate according to the prompts.

1. Turn on the device and enter the “Smart Key Matching” interface.

2. Put the smart card in the device induction area, press the “read” button, and wait for the prompt “card read successfully”

3. Replace the corresponding ID/IC blank copy card to the device induction area, press the “Write” button, and wait for the prompt “Card write success” to complete the copying

“Card” key: Manually select the frequency of reading and writing cards;

“Edit” key: Manually enter the card number that needs to be keyed

2. Yunrui decoding: When the “smart key matching” reads the card, it prompts that the card is encrypted, please connect to the computer or Yunrui decoding, which means that the card is encrypted, press OK to enter Yunrui decoding §

1. Enter the “Yunrui Decoding” interface

2. Put the smart card in the induction area, press the “read” button, and wait for the prompt “decoding completed, 16 sectors successfully”

3. Replace the blank copy card of the corresponding IC to the device induction area, press the “Write” button, and wait for the prompt “Write the card successfully” to complete

Three, hotel key §

1. Enter the “Hotel Keys” interface

2. Select “Standard Hotel Low-Frequency Key Distribution”, when the hotel card issuer issues the card, place the device sensing area on the smart card, press the “OK” button, and wait for the prompt “Detection successful”

3. Replace the blank copy card corresponding to T5588 or EM4308 hotel to the device induction area, press the “Write” button, and wait for the prompt “Card writing is successful” to complete the copying

4. High-frequency detection: When “Yunrui Decoding” or “Super Decoding” does not indicate that the decoding is completed, and 16 sectors are successful, it means that the card has not been successfully decoded, and you need to use “High-frequency detection” to swipe the card Read head on-site detection key assisted decoding §

1. Select to enter the “High Frequency Detection” interface

2. Put the smart card in the induction area, press the “read” button, and wait for the device to prompt “card read successfully”

3. Move the induction area of the key machine close to the access control/elevator swipe card reader for detection, and wait for the prompt “detection successful”

4. After the detection is successful, press the “OK” key to decode

5. After the decoding is successful, replace the IC blank card to the device induction area, press the “write” button, and wait for the prompt “card writing is successful” to complete the copy.

5. Frequency detection §

1. Select to enter the “Frequency Detection” interface

2. Put the key machine on the card lock/access control or the elevator card reader, press the “OK” button to detect, and wait for the prompt “detection successful”

Six, hotel business card §

1. Select to enter the “Hotel Business Card” interface

2. After selecting the corresponding data in the card making library, copy the T5588 or EM4308 hotel blank card to the induction area, press the “Write” button, and wait for the prompt “Card writing is successful” to complete the copying

7. Keystore §

1. Select to enter the “Keystore” interface

2. After selecting the corresponding data in the keystore, you can edit the data, delete the data and write the corresponding data to the card

3. Super decoding: When the “Yunrui decoding” prompts that decoding fails, it means that the card cannot be decoded by Yunrui decoding. Put this card in the device induction area, and press the “read” button to perform super decoding.

4. Select to enter “Super Decoding” to decode

5. Put the smart card in the induction area, press the “read” button, and wait for the prompt “decoding completed, 16 sectors successfully”

6. Replace the corresponding ID/IC blank copy card to the induction area, press the “Write” button, and wait for the prompt “Card writing is successful” to complete the copying

9. NFC §

1. Select to enter the “NFC” interface, and simulate mobile phone NFC according to the key matching prompt

2. Press the “Read” button to read the original card, and wait for the device to prompt the card to read successfully

3. Replace the IC copy card with the UID model to the device sensor, click the “Write” button, and wait for the prompt to write the card successfully.

4. Open the card package function in the mobile wallet, create a simulated physical access control card, put the UID card in the NFC induction area of the mobile phone, add the card reader and set it as the default card

5. After placing the NFC induction area of the mobile phone in the induction area of the key-dispensing machine, click the “Write” button of the device, and wait for the device to prompt the card writing success to complete the mobile phone access control card simulation (similar to the bracelet).

10. Special card §

1. Select to enter the “Special Card” interface

2. Select the NSC function, place the NFC card in the device sensing area, click the “Read” button, and wait for the device to prompt the card to read successfully.

3. Replace the corresponding NSC copy card to the device induction area, click the “Write” button, and wait for the device to prompt that the card writing is successful, that is, the copy is completed.

11. System Settings §

1. Hotel blank card identification: Identify the hotel blank card model is T5588 or EM4308

2. Card format: used to clear the card information

3. Known key decoding: when a valid key is detected through high-frequency detection, it can also be decoded through this function

4. Wireless network settings: choose to connect to WIFI/mobile phone hotspot. In order to make the key machine work normally, please be sure to set up the wifi connection

5. Voice settings: Chinese and English voice switching

6. Volume setting: volume adjustment

7. Screen brightness setting: screen brightness adjustment

8. Storage management: you can delete keystore keys, database data and card library data

9. Software upgrade: The device is connected to WIFI and can be upgraded to the latest version

10. Restore factory settings: clear all data information in the device

11. U-disk mode: Turn on or off the U-disk. After the device is connected to the computer, the U-disk will not be automatically ejected.

12. System information: View device system version information