Broadcast UDP (BU)

FunctionDefines whether the device will accept or reject broadcast UDP datagrams
Set (S) command formatSBUx, where x: 0 (disabled), 1 (enabled)
Get (G) command formatGBU
Initialize (I) command effectInitialized unconditionally, through network command, or serial command
Post-initialization value0 (disabled)
Change takes effectAfter reboot
Relevance conditionsCurrent Transport Protocol (TP) setting = 0 (UDP)

When Broadcast UDP is 1 (enabled), the device will accept and route the data received in broadcast UDP datagrams, as if these packets were addressed directly to this device. Broadcast packets must still be addressed to the correct Port Number (PN). The device will ignore broadcast UDP packets when Broadcast UDP is 0 (disabled).

This Setting is irrelevant when current Transport Protocol (TP) setting is 1 (TCP) because TCP protocol cannot use broadcast packets to carry data.