Inband Commands (IB)
Function | Enables or disables inband (TCP) programming |
Set (S) command format | SIBx , where x : 0 (disabled), 1 (enabled) |
Get (G) command format | GIB |
Initialize (I) command effect | Initialized unconditionally, through network command, or serial command |
Post-initialization value | 0 (disabled) |
Change takes effect | After reboot |
Relevance conditions | Current Transport Protocol (TP) setting = 1 (TCP) |
Inband Commands setting defines whether inband (TCP) programming is enabled or disabled.
This Setting is irrelevant when the current Transport Protocol (TP) is 0 (UDP) because inband command passing is only possible when TCP/IP is used for data connections between the network host and the device.