MAC-address (FE)
Function | Defines MAC-address of the device |
Set (S) command format | SFExxx.xxx.xxx.xxx.xxx.xxx , where xxx.xxx.xxx.xxx.xxx.xxx is the MAC-address in the dot-decimal notation (i.e. 0.2.3.4.120.240) |
Get (G) command format | GFE |
Initialize (I) command effect | Only initialized if invalid, through network command, serial command |
Post-initialization value | 0.1.2.3.4.5 |
Change takes effect | After reboot |
Each device is shipped from the factory with unique MAC-address already assigned to it. DO NOT change this address unless you have a good reason to do so. If you do change the address remember that the first digit of the address must be even!
Since the MAC-address of each device is unique it may be used for device identification. It is returned by the Echo (X) command and also used to address a particular device in the Assign IP-address (A) command and Select In Broadcast Mode (W) command.