Set Setting (S)
Function | Sets (writes) new setting value |
Can be issued through | Network (broadcasts ignored*, login required); serial port |
Command format | Sssvv...v , where ss : setting mnemonic, vv...v : new setting value |
Possible replies | A, D, C, F |
Set Setting command assigns new values to the selected setting. ss is the setting mnemonic, i.e. IP
for the IP-address (IP) setting.
Example: to set IP-address to 192.168.100.40 issue the following command:
→device: SIP192.168.100.40
device→: A
When issued through the network, this command requires prior login using the Login (L) command
* Without prior selection using Select In Broadcast Mode (W) command.